BS ISO 22762-2:2018
$198.66
Elastomeric seismic-protection isolators – Applications for bridges. Specifications
| Published By | Publication Date | Number of Pages |
| BSI | 2018 | 66 |
This document specifies minimum requirements and test methods for elastomeric seismic isolators used for bridges, as well as rubber material used in the manufacture of such isolators.
It is applicable to elastomeric seismic isolators used to provide bridges with protection from earthquake damage. The isolators covered consist of alternate elastomeric layers and reinforcing steel plates, which are placed between a superstructure and its substructure to provide both flexibility for decoupling structural systems from ground motion and damping capability to reduce displacement at the isolation interface and the transmission of energy from the ground into the structure at the isolation frequency.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 2 | National foreword |
| 7 | Foreword |
| 8 | Introduction |
| 9 | 1 Scope 2 Normative references 3 Terms and definitions |
| 11 | 4 Symbols |
| 14 | 5 Classification 5.1 General 5.2 Classification by construction |
| 15 | 5.3 Classification by tolerances on shear stiffness 6 Requirements 6.1 General 6.2 Type tests and routine tests |
| 18 | 6.3 Functional requirements 6.4 Design compressive force and design shear displacement 6.5 Performance requirements 6.5.1 General |
| 19 | 6.5.2 Compressive properties 6.5.3 Rotation properties 6.5.4 Shear properties |
| 20 | 6.5.5 Tensile properties |
| 21 | 6.5.6 Dependencies of shear properties |
| 22 | 6.5.7 Shear displacement capacity 6.5.8 Durability |
| 23 | 6.5.9 Cyclic compressive fatigue properties 6.5.10 Reaction force characteristics at low-rate deformation 6.6 Rubber material requirements 6.6.1 General 6.6.2 Tensile properties |
| 24 | 6.6.3 Properties after ageing in air |
| 25 | 6.6.4 Hardness 6.6.5 Adhesion properties 6.6.6 Compression set |
| 26 | 6.6.7 Ozone resistance 6.6.8 Other properties 6.7 Dimensional requirements 6.8 Requirements on steel used for flanges and reinforcing plates 7 Design rules 7.1 General |
| 28 | 7.2 Shape factor 7.2.1 First shape factor 7.2.2 Second shape factor |
| 29 | 7.3 Compressive and shear properties 7.3.1 Compressive stiffness 7.3.2 Shear stiffness and equivalent damping ratio 7.4 Shear strain due to horizontal displacements |
| 30 | 7.5 Total local shear strain 7.5.1 Local shear strain due to compressive force 7.5.2 Local shear strain due to compressive force 7.5.3 Total local shear strain |
| 31 | 7.6 Tensile stress on reinforcing steel plates 7.7 Stability 7.7.1 Maximum compressive stress in non-seismic condition 7.7.2 Rotation performance check |
| 32 | 7.7.3 Buckling check 7.7.4 Tensile stress on isolator 7.8 Force, moment and deformation affecting structures 7.8.1 Shear force affecting structures due to movement 7.8.2 Resistance to rotation |
| 33 | 7.8.3 Compressive displacement due to compressive force 7.9 Design of fixings 7.9.1 External forces affecting joint members 7.9.2 Fixings and stresses to be checked |
| 34 | 7.9.3 Allowable stress 8 Manufacturing tolerances 8.1 General 8.2 Measuring instruments 8.3 Plan dimensions of isolator body 8.3.1 Measurement method (see Figure 1) |
| 35 | 8.3.2 Tolerances 8.4 Product height 8.4.1 Measurement method |
| 37 | 8.4.2 Tolerances |
| 38 | 8.5 Flatness of products 8.5.1 Measurement method 8.5.2 Tolerances 8.6 Horizontal offset 8.6.1 Measurement method 8.6.2 Tolerances 8.7 Plan dimensions of flanges |
| 39 | 8.8 Flange thickness 8.9 Tolerances on positions of flange bolt holes |
| 40 | 9 Marking and labelling 9.1 Information to be provided 9.2 Additional requirements |
| 41 | 9.3 Marking and labelling examples 10 Test methods 11 Quality assurance |
| 42 | Annex A (normative) Tensile stress in reinforcing steel plate |
| 44 | Annex B (normative) Buckling stability |
| 45 | Annex C (normative) Allowable tensile stress in isolator |
| 46 | Annex D (informative) Dependency of ultimate properties on shape factor |
| 50 | Annex E (informative) Minimum recommended tensile properties for rubber materials |
| 51 | Annex F (informative) Compressive stiffness |
| 55 | Annex G (informative) Determination of shear properties of elastomeric isolators |
| 60 | Annex H (informative) Determination of local shear strain due to compression |
| 63 | Annex I (informative) Maximum compressive stress |
| 64 | Bibliography |
Related products
-
ISO 22762-2:2018
Elastomeric seismic-protection isolators — Part 2: Applications for bridges — Specifications Published By Publication Date…
-
BS ISO 22762-2:2018 – TC:2020 Edition
Tracked Changes. Elastomeric seismic-protection isolators – Applications for bridges. Specifications Published By Publication Date Number…
